Setup Remote Access via P2P using SmartPSS

1. Locate the serial number of your NVR or DVR. The serial number can be found at the following locations:

  • On the underside or side of the unit
  • In the web interface, under Info->Version
  • On the system interface under Main Menu->Settings->Network->P2P
  • On the system interface under Main Menu->Info->System->Version

2. Launch SmartPSS. (Default SmartPSS credentials are admin:admin)

3. Click, "Devices"

4. Click, "Manual Add"

5. Input the following:

Device Name:(Any Name)

  • Register Mode: SN
  • SN: (Your Device's Serial)
  • Group Name: (Any Group)
  • User Name: admin
  • Password: admin (Your NVR's Password)

6. Click, "Get Info"

7. Click, "Save and Continue"

8. After a few moments, SmartPSS will connect to the NVR and display as, "Online"

Did this answer your question?