Setup Remote Access via P2P using SmartPSS

Locate the serial number of your NVR or DVR. The serial number can be found at the following locations:

On the underside or side of the unit

In the web interface, under Info->Version

On the system interface under Main Menu->Settings->Network->P2P

On the system interface under Main Menu->Info->System->Version

Launch SmartPSS. (Default SmartPSS credentials are admin:admin)

Click, "Devices"

Click, "Manual Add"

Input the following:

Device Name:(Any Name)

Register Mode: SN
SN: (Your Device's Serial)
Group Name: (Any Group)
User Name: admin
Password: admin (Your NVR's Password)

Click, "Get Info"

Click, "Save and Continue"

After a few moments, SmartPSS will connect to the NVR and display as, "Online"

Was this article helpful?
Thank you!